Filter
Top Products
78
Settings For details on the operation 1 page 67
Shooting Settings — Shooting Settings 2
The default settings are marked with .
When the camera is rotated to shoot a portrait image, the camera records its position change
and displays the image in the portrait position.
• Depending on the shooting angle of the camera, the orientation of the image may not be recorded
correctly. When the orientation of the image is not correct, you can rotate the image using the procedure
on page 63.
Displays the recorded image on the screen for approximately two seconds immediately after
shooting a still image.
• If you press the shutter button halfway down during this period, the recorded image display disappears
and you can immediately shoot the next image.
This sets the smile detection level when [Smile Shutter] (page 44) is selected in the Scene
Selection.
• It is difficult to detect the smile under the following conditions.
– When the face is too dark or too bright
– When the face is far from the camera and too small
– When the subject is wearing sunglasses or glasses with thick frames
– When the front hair, hat, or other objects are covering the eyes
– When the subject is not facing towards the front
Auto Orientation
On
Records the image with the correct orientation.
Off
Auto Orientation deactivated.
Auto Review
On
Use the Auto Review.
Off
Does not use Auto Review.
Smile Level
High
Setting to [High] makes it easier to detect a smile.
Medium
Low