Filter
Top Products
Getting started
Getting started
17
3 Press MENU.
4 Select the (OTHERS) menu by
turning the SEL/PUSH EXEC dial,
then press the dial.
5 Select [CLOCK SET] by turning the
SEL/PUSH EXEC dial, then press the
dial.
6 Set [Y] (year) by turning the SEL/
PUSH EXEC dial, then press the dial.
You can set any year up to the year 2079.
7 Set [M] (month), [D] (day), hour and
minute in the same way as was done in
step 6, then press the dial.
Step 6: Inserting a
cassette tape
You can use mini DV cassettes only.
For details on these cassettes (such as write-
protection), see page 91.
b Note
• Do not force the cassette into the compartment. This
may cause a malfunction of your camcorder.
1 Slide the OPEN/EJECT lever in
the direction of the arrow and open the
lid.
The cassette compartment automatically
comes out and opens up.
CAMERA SET
WB PRESET
AE RESPONSE
GAIN SETUP
SHOT TRANS
STEADYSHOT
STDYSHOT TYP
HANDLE ZOOM
[
MENU
]
:END
OTHERS
RETURN
ASSIGN BTN
CLOCK SET
WORLD TIME
LANGUAGE
BEEP
REC LAMP
FORMAT LAMP
[
MENU
]
:END
120min
CLOCK SET
[
MENU
]
:CANCEL
DMY 01100:2004
120min
CLOCK SET
[
MENU
]
:CANCEL
DMY 01100:2004
Lid
OPEN/EJECT lever
,continued