Filter
Top Products
Recording
Recording
35
6 Repeat steps 4 and 5 to adjust other
items.
7 Select [ RETURN] by turning the
SEL/PUSH EXEC dial, then press the
dial.
8 Select [OK] by turning the SEL/PUSH
EXEC dial, then press the dial.
A picture profile indicator appears.
To cancel the picture profile recording
Select [OFF] in step 2, then press the SEL/
PUSH EXEC dial.
To check the picture profile settings
During recording or in the standby mode, press
STATUS CHECK (p. 24).
To copy the picture profile setting to
other picture profiles
1
Press PICTURE PROFILE.
2 Select the number of the picture profile
to be copied from by turning the SEL/
PUSH EXEC dial, then press the dial.
3 Select [SETTING] by turning the SEL/
PUSH EXEC dial, then press the dial.
4 Select [COPY] by turning the SEL/
PUSH EXEC dial, then press the dial.
5 Select the number of the picture profile
to be copied to by turning the SEL/PUSH
EXEC dial, then press the dial.
6 Select [YES] again by turning the SEL/
PUSH EXEC dial, then press the dial.
If you decide not to copy the settings, select
[NO].
7 Press PICTURE PROFILE.
To reset the picture profile settings
You can reset the picture profile settings by
picture profile number. You cannot reset all
picture profile settings at once.
1 Press PICTURE PROFILE.
[SKINTONE
DTL]
To make wrinkles less
noticeable by suppressing the
outlines on the part of skin
color to be enhanced.
[TYPE1] (the color range
recognized as a skin color is
narrow) to [TYPE3] (the color
range recognized as a skin
color is wide)
In the case of [TYPE3], the
effect may also be applied to a
color that is not a skin color.
[OFF]: no adjustment
[AE SHIFT] –7 (darker) to +7 (lighter)
[AGC LIMIT] Select the upper limit for the
gain ([OFF], 12dB, 6dB,
0dB).
[OFF] is 18dB.
[AT IRIS
LMT]
Select the highest aperture
value for the automatic
adjustment (F11, F6.8, F4).
[WB SHIFT] –7 (to make white parts
bluish) to +7 (to make white
parts reddish)
[AWB SENS] To set the auto white balance
operation under a reddish light
source such as an
incandescent lamp or candle,
or under a blueish light source
such as in outdoor shade.
[HIGH] (reddishness or
blueishness is reduced) to
[LOW] (reddishness or
blueishness is increased)
[AWB SENS] is not effective
under a clear sky or the sun.
[CINEMA-
TONE γ]
[ON]: Pictures are recorded
with the gamma curve that
reproduces the natural
gradation sequence, similar to
that of film cameras.
[CINE-
FRAME]
[CINEFRAME 25]:
Pictures are recorded with a
cinema-like atmosphere.
[OFF]: normal recording
[COPY] To copy a picture profile
setting to other picture
profiles.
[RESET] To restore the default setting
of the picture profile.
Item Adjustment
,continued