Filter
Top Products
Initial Operations (Basic Initial Setup)
17
3
Select the desired display language from the list,
and then click [Next].
The [EULA] screen appears.
4
Read the user license agreement, click [Accept],
and then click [Next].
The [Keyboard Layout] screen appears.
5
Select the type of USB keyboard connected to the
unit from the list, and then click [Next].
The [Time Zone] screen appears.
6
Select the desired time zone from the list, and then
click [Next].
* There is no option for enabling or disabling
summer time. If you select a time zone in which
time is adjusted for summer time, the time is
adjusted for summer time automatically.
The [Date and Time] screen appears.
7
Verify the date and time, and configure the correct
date and time if necessary, then click [Next].
The [General Network Setting] screen appears.
8
Perform the following steps to configure the
network settings.
(1) Enter an IP address for each server in the
[General Network Setting] screen, and click
[Next].
Primary DNS
Enter the primary DNS (Domain Name Server)
IP address.
When there is no primary DNS or one is not
necessary, do not enter an IP address.
Secondary DNS
Enter the secondary DNS IP address.
When there is no secondary DNS or one is not
necessary, do not enter an IP address.
Default Gateway
Enter the default gateway IP address.
When only the local network is used or
connection to other networks is not necessary,
do not enter an IP address.
The [Network Device #1] screen appears.
(2) Configure the [Network Device] settings for
each of the LAN ports.
When using the NSR-100/50, configure the
settings for each of the three LAN ports (LAN1,
LAN2, and LAN 3).
When using the NSR-25, configure the settings
for the single LAN port (LAN1).