Filter
Top Products
Initial Operations (Basic Initial Setup)
19
10
Select the appropriate video format, depending on
your region, [NTSC] or [PAL], and then click
[Next].
* This screen only appears when using the
NSR-100/50.
The [Host Name] screen appears.
11
Perform settings for each item, and then click
[Next].
Host Name
Enter the host name.
Note
Use only alphanumeric characters, underscores (_),
and hyphens (-).
Domain Name
Enter the network domain name according to your
network.
Example: xxx.sony.co.jp
When you do not register the NSR to the DNS, you
do not need to change the default settings.
The [Summary] screen appears.
12
Confirm the settings and then click [Next].
The [Warning] screen appears.
13
Click [Finish].
The NSR restarts automatically.
Camera IP Address Configuration
and Registration to NSR
After restarting, the logon screen appears.
Next, configure the IP addresses for cameras and
register them to the NSR.
1
Type your user name and password, and then click
[Log on].
Default User Name: admin
Default Password: admin
The Camera screen appears in the Configuration
window.
2
Click [Camera IP Setup].
If the IP addresses for the cameras have already
been set, click [Register All] and proceed to Step 5.
The Camera IP Setup window appears.