Filter
Top Products
Operating the Camera
Configuration of Main Viewer
26
Moving the camera to a preset
position (Common operations in
Area zoom and Vector dragging
modes)
Select a preset position name from the Preset position
panel. The camera will move to the preset position that
you have stored in memory using the Preset position
menu (page 61).
Using pan/tilt/zoom operations with
the displayed control bar (PTZ
Control bar only)
Pan/Tilt operations
Click the arrow of the direction you wish to move the
camera. Continue clicking on the arrow to keep moving
the direction of the camera.
Zoom operation
Click to zoom out, click to zoom in. The zoom
operation continues while you are clicking on the
button.
Controlling the Camera on a Full
Image
When the camera is in controllable condition, the full
image appears on the panorama panel.
The full image is the still image of entire area to be shot
by the camera in reduced-sized image. By clicking on
the full image, the selected location appears on the
panorama panel.
To create a full image
Create the full image with Capture full image in the
Initialize tab of the System menu. See page 37 for
details.
Tip
Be sure to recreate the full image if you move the camera
position, invert the image or change the layout around
the camera.
To display a specified position on the
monitor
1
Create the full image and display on the monitor.
2
Click the potion you want to see on the full image.
The current specified position appears on the monitor
screen.