Filter
Top Products
37-GB
Various ways of recording
5 Select the desired shutter speed.
Note that the shutter speed is
indicated as, for example, “100”
for 1/100 shutter speed.
You can select from the following
12 speeds.
When you select “NTSC” in
“VIDEO OUT” in the SET UP
menu: 1/8, 1/15, 1/30,
1/60, 1/90, 1/100, 1/125, 1/180,
1/250, 1/350, 1/500, 1/725
When you select “PAL” in
“VIDEO OUT” in the SET UP
menu: 1/6, 1/12, 1/25, 1/50, 1/75,
1/100, 1/120, 1/150, 1/215, 1/300,
1/425, 1/600
For a faster shutter speed, select a
larger value indicator.
To cancel PROGRAM AE
Press PROGRAM AE repeatedly until
the indicator on the LCD screen goes
out.
PNotes
•You can focus only on distance subjects
in Landscape modes.
•In Panfocus mode, the zoom position
and focus are fixed.
•When you record in the Twilight
+ (plus) mode we recommend that you
use a tripod to compensate for camera-
shake.
•Set the flash mode to forced-flash
when you use flash in the following
mode:
Twilight mode, Twilight + (plus) mode
or Landscape mode.
•When you record in the Twilight
+ (plus) mode, the picture may become
coarse momentarily just before your
camera focuses on a subject in the auto
mode. This is not a malfunction.
Using the Aperture Priority
mode
1 Press PROGRAM AE repeatedly
to select .
2 Press v of the control button. The
menu bar appears on the LCD
screen.
3 Select ”CAMERA” with the
control button, then press it. The
CAMERA menu appears on the
screen.
4 Select “APERTURE” with the
control button, then press it.
5 Select the desired aperture value.
You can select from the following
7 value: F2.8, F3.4, F4.0, F4.8, F5.6,
F6.8, F8.0.
For a smaller aperture, select a
higher value.
PNote
You cannot select F2.8 while you set the
zoom lever to “T” side.
Using the Shutter Priority
mode
1 Press PROGRAM AE repeatedly
to select .
2 Press v of the control button. The
menu bar appears on the LCD
screen.
3 Select ”CAMERA” with the
control button, then press it. The
CAMERA menu appears on the
screen.
4 Select “SHUTTER SPEED” with
the control button, then press it.