Filter
Top Products
82-GB
Using with External Devices
This part describes PictureGear operation when connected with external devices. See
the PictureGear on-line help and the device manuals for more details.
Using a Video Camera
With a Sony video camera connected to the PC, PictureGear lets you transfer images
between the PC and the camera.
PNote
The video camera described here refers to the device with which the software was bundled
(or with the devices for which the accessory kit bundle is intended). Other devices are not
compatible.
Connections and Settings
1 Turn off the video camera and PC power.
2 Connect one end of the connection cable to a PC serial port, and the other
end to the DIGITAL I/O jack on the video camera.
3 Turn on the video camera, and set it to communicate with the PC (set the
power switch to “Video”, etc.).
Refer to the video camera operating manual for details.
4 Turn on the PC and run PictureGear.
5 In the Setup menu, point to Connection with Other Device, and click Video
Camera.