Filter
Top Products
101
Troubleshooting
Others
You cannot insert the date
or print images in the
index mode.
• The printer does not provide these functions.
• The date may not be inserted in the index mode
depending on the printer.
p Consult with the printer manufacturer whether the printer
provides these function or not.
p Consult with the printer manufacturer.
“---- -- --”is printed on the
date-inserted part.
• The recording date data is not recorded on the
image.
p The images that do not have the recording date data cannot be
printed with the date inserted. Set [Date] to [Off] and print it.
Symptom Cause Solution
The camera does not
work, no operations can
be performed.
• The battery level is low or zero (The
indicator appears.).
• The AC Adaptor (not supplied) is not connected
securely.
p Charge the batteries or replace with new ones (pages 11, 12).
p Connect it securely to the DC IN jack of the camera and to a wall
outlet (wall socket) (page 15).
The power is on, but the
camera does not work.
• The internal system is not working properly. p Remove, and then, after one minute, reinstall the batteries and
turn on the camera. If this does not work, press the RESET
button located inside the jack cover with a pointed object, then
turn the power on again. (This will clear the date and time
settings, etc.)
You cannot identify the
indicator on the LCD
screen.
— p Check the indicator (pages 116 to 119).
The lens gets fogged. • Condensation is occurring. p Turn off the camera, leave the camera for about an hour and then
try to use it again (page 111).
The camera gets hot if you
use it for a long time.
— p This is not a malfunction.
Symptom Cause Solution