Filter
Top Products
TV-IP262PI
TRENDnet User’s Guide
© Copyright 2012 TRENDnet. All Rights Reserved.
10
4. After installing the IPSetup utility, the application is automatically installed to
your computer, and creates a folder in Start\Program\TRENDnet\IPSetup.
5. Click
Start
>
Programs
>
TRENDnet
>
IPSetup
,
and then click IPSetup.
6. The IPSetup window will appear. It will search for the camera within the same
network.
Camera Display Area
- Access Camera: Open Web browser to view camera .
- Camera Display Area: By default, the IP setting on the Camera is set to DHCP.
If you have DHCP server, the camera will automatic get the IP address from
DHCP server. If you do not have DHCP server on your network, it will show the
default IP as 192.168.10.30. Double click the IP address; it will link to Camera’s
Web Configuration page.
Change IP: Click this button to bring up the following window. It allows you to
change the IP Address. You can select either Static IP or click DHCP. Then,
enter the Administrator ID & Password. By default the ID/Password is: admin.
When complete, click Change.
Search: Click this button to search the connected camera in the same network
Exit: Click this button to exit the program.