Filter
Top Products
TV-IP262PI
TRENDnet User’s Guide
© Copyright 2012 TRENDnet. All Rights Reserved.
7
5. Connect a network cable to the camera’s network port and then to your router.
If you are using PoE, please ensure the cable is connected to a PoE switch or
PoE injector.
6. Wait while camera is searching.
7. The founded cameras will show on the screen. The camera already selected by
default if you have only one camera installed. If you have more than
one
camera in the same Network, you will need to identify the camera by the MAC
ID.
8. You MUST change the default password of the camera. Enter the default password:
admin, Enter your new password: must be between 8 and 32 characters. (Alphanumeric:
a-z, A-Z,0-9)