Filter
Top Products
TV-IP262PI
TRENDnet User’s Guide
© Copyright 2012 TRENDnet. All Rights Reserved.
16
NOTE: The “General User” is allowed to access the camera and control the Function
buttons on the Main screen of the Web Configuration.; the “Guest” can only view the
live view image from the Main screen while accessing the camera. Only the
“Administrator” is allowed to configure the camera through the Web Configuration.
Direct Video Stream Authentication:
To steam the video directly without going through the configuration page, you can
access it via Internet.
Enable: User needs to enter user name and password to stream the camera.
Disable: User can stream the camera without entering the user name and
password.
Examples of the direct link to video:
H.264 Mode
http://camera_ip_address:port
number/h264view.htm
MPEG4 Mode
http://camera_ip_address:port
number/mpgview.htm
MJPEG Mode
http://camera_ip_address:port
number/jpgview.htm
NOTE This feature is enabled by default, and for security reason, it is recommended to
have the feature enabled at all time.
Network
The Network menu contains two sub-menus that provide the networking settings for
the camera, such as the IP Setting, DDNS Setting, and IP Filter.