© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP322P
16
Basic >> System
Basic: This item allows you to assign the camera name and location information.
- Camera Name: Enter a descriptive name for the camera, which is helpful
to identify the camera easily while multiple cameras are connected within
the network.
- Location: Enter a descriptive name for the location where is monitored by
the camera.
- Language Default: Select the displayed language as default.
Indication LED: This item allows you to set the LED illumination as desired.
There are two options: Normal and OFF.
IR CUT & IR LED: The camera features ICR function (IR CUT Filter) and IR LED,
allowing you to capture clear image when environment light changed.
- IR CUT Control: Set the ICR function (IR CUT filter) for the camera: Auto
mode or Off mode.
In Auto mode, the lens filter will be switched automatically to capture
black and white image when the change of environment light is detected
by the camera’s light sensor.
- IR LED: Enable or disable the camera’s IR LED manually by selecting ON or
OFF.
Basic >> Date & Time
Date & Time: Enter the correct date and time for the system.
- TimeZone: Select the proper time zone for the region from the pull-down
menu.
- Automatically adjust clock for daylight saving time changes: select this
option for daylight saving
- Synchronize with PC: Select this option and the date & time settings of the
camera will be synchronized with the connected computer.
- Synchronize with NTP Server: Select this option and the time will be
synchronized with the NTP Server. You need to enter the IP address of the
server and select the update interval in the following two boxes.
- Manual: Select this option to set the Date and Time manually.