Filter
Top Products
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP322P
30
- Profile Name: Display the profile name that you select in the Schedule
Profiles list.
- Weekdays: Select the weekday(s) that you want to separately assign in the
schedule profile. The weekday that has been assigned will be displayed
with green color.
- Time List: Display the time period that you have assigned within the
selected weekday. To assign the same time period to every weekday, click
Copy this to all weekdays; click Delete this from all weekdays to remove
the selected time period from every weekday. Click Delete to remove the
selected time period.
- Start/End Time: Enter the start and end time and then click Add to assign a
time period within in the selected weekday.
Event Configuration >> Motion Detect Trigger
Motion Detect Trigger: Select the Enable option to enable the trigger function
of the camera, so that you can send captured images within the detecting area
to the FTP server, email receiver, or the Network Storage server. You have to
configure corresponding settings, such as FTP server and email server, to
enable this feature. Please note that you have to configure the related settings
before enabling these features.
- Schedule Profile: Select a schedule profile from the pull-down list.
- Action: Set the Trigger Out function or select the destination that the
captured images will be sent to: , or Record to SD Card, Record to
Network Storage, Send Email, FTP Upload, or Instant Message.