TRENDnet TVIP322P Security Camera User Manual


 
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP322P
42
Troubleshooting
1. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the
installation menu does not appear automatically. What should I do?
Windows 7
If the installation menu does not appear automatically, click on the Windows
Icon on the bottom left hand corner of the screen, click the “Search programs
and files” box, and type D:\autorun.exe, where “D” in “D:\autorun.exe” is the
letter assigned to your CD-ROM Drive, and then press the ENTER key on your
keyboard .
Windows Vista
If the installation menu does not appear automatically, click Start, click the
Start Search box, and type D:\autorun.exe where "D" in "D:\autorun.exe" is the
letter assigned to your CD-ROM Drive, and then press the ENTER key on your
keyboard.
Windows XP
If the window does not appear automatically, click Start, click Run and type
D:\autorun.exe where “D” in “D:\autorun.exe” is the letter assigned to your
CD-ROM Drive, and then press the ENTER key on your keyboard.
2. IP Setup is unable to detect my camera. What should I do?
a. Verify that you have followed all the steps in Section 2: Hardware
Installation.
b. Disable any software firewall programs such as ZoneAlarm or Norton
Internet Security. If you are using Windows 7, Vista or XP, disable the built
in firewall.
c. Click on Search in IPSetup.
d. Reset the IP Camera
Remove the front cover
Take a pen and press the reset button for 10 seconds, then let go.
3. I do not have a DHCP server or DHCP is disable on my network and I am
unable to configure the TV-IP322P. What should I do?
a. Go to the TCP/IP settings on your computer and assign a static IP address
on your computer’s network adapter in the subnet of 192.168.10.x. Since
the default IP address of the TV-IP322P is 192.168.10.30, do not assign a
static IP address of 192.168.10.30 on your computer’s network adapter.
b. Open Internet Explorer and enter http://192.168.10.30 into the address
bar.