Filter
Top Products
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP322P
20
The Apple Safari is already with Bonjour. You can download the complete
Bonjour for Internet Explorer browser from Apple's web site by visiting
http://www.apple.com/bonjour/.
RTSP
- RTSP Streaming: The camera supports three levels of RTSP access. The
default RTSP Port is 554.
Disable
RTSP link does not require authentication.
No username/password required.
Basic
RTSP link prompts for authentication.
Username/password are transmitted in plain text.
Digest
RTSP link prompts for authentication.
Username/password are encrypted during data
transmission.
TRENDnet recommends using RTSP Digest authentication method.
Disable and basic methods pose security risks. Please verify if your RTSP
client supports RTSP authentication method selected.
- Multicast settings: Configure the following settings so that you can deliver
information from your camera to a set of receivers.
Group IP
Assign a category of IP addresses to receive the
information from the camera.
H.264 Port
Assign a multicast port for H.264 in the text box.
The default port is 1234.
MPEG4
Port
Assign a multicast port for MPEG4 in the text box.
The default port is 1236.
Audio Port
Assign a multicast port for audio in the text box.
The default port is 1238.
TTL
Set the TTL value from 1 to 255, which is used to
modify the time to live field in the IP header.
QoS
- Live Video DSCP: Assign the DSCP (DiffServ Code Point) of the stream video
from the camera.
- Live Audio DSCP: Assign the DSCP (DiffServ Code Point) of the stream
audio from the camera.
Network >> IP Filter
The IP Filter setting allows the administrator of the camera to limit the users within
a certain range of IP addresses to access the camera.
To disable this feature, select the Disable option; otherwise, select the Accept
option to assign the range of IP addresses that are allowed to access the camera, or
select the Deny option to assign the range of IP addresses that are blocked to
access the camera.
Disable: Select this option to disable the IP Filter function of the camera.
Accept
- IPv4: Assign a range of IP addresses that are allowed to access the camera
by entering the Start IP address and End IP address options. When you are
finished, click Add to save the range setting. You can repeat the action to
assign multiple ranges for the camera.