Filter
Top Products
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP322P
41
LED Power, Link
IR Wavelength 850nm
Reset Button Reboot or restore to factory default
Power Over
Ethernet
PoE Power on RJ-45 pin 3,6 for Power+ and pin 1,2 for
Power-
Power
Consumption
9.5 Watts max.
Power Input: 100 ~ 240V AC , 0.5A, 50~60Hz
Output: 12VDC 1.5A external power adapter
(for non-PoE installations)
Dimension 235 x 110 x 89 mm (9.3 x 4.3 x 3.5 in.)
Weight 1.5 kg (3.2 lb)
Operating
Condition
Temperature : -20C ~ 60C (-4F ~ 140F)
Wind Velocity: 130km/hr
Humidity: Max. 90% (non-condensing)
Certifications CE, FCC, IP66
Requirement
Management
Interface
Internet Explorer 6.0 or above
To Run SecurView
Pro
Windows 7 (32/64-bit), Vista (32/64-bit), XP (32/64-bit)
SecurView Pro Channel: supports up to 32 cameras
Record/Playback/Motion Detection
Network Protocols
TCP/IP, IPv4, IPv6, UDP, ICMP, DHCP, NTP, DNS, DDNS,
SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour,
RTP, RTSP, and RTCP
Management
Remote Remote management supported
Backup / Restore Save/retrieve configuration files
Settings
Image
Brightness, saturation, sharpness, and mirror
(horizontal/vertical)
Video Encoding type: H.264, MPEG-4, MJPEG
Compression: 5 levels
Resolution/Frame Rate:
SXGA (1280 x 1024) up to 15fps
VGA (640x480) up to 30fps
QVGA (320x240) up to 30fps
QQVGA (160x120) up to 30fps
Multi-Stream
H.264: SXGA, VGA, QVGA, QQVGA
MPEG4: VGA, QVGA, QQVGA
MJPEG: SXGA, VGA, QVGA, QQVGA
Recording
Recording type: continuous, schedule, or motion
detection with software
Event Management
Event trigger: motion, GPIO, schedule
Store video file to SD card
Send Instant message to Jabber client via Jabber server
QoS DSCP
Port Settings HTTP port: 80 (default)
Digital Zoom 3x
Dynamic DNS Yes
Time Synchronize with NTP server or set time/date manually
SMTP SMTP mail supported up to 2 destination accounts
System Log 100 entries (max.)