Filter
Top Products
TV-IP512P ProView PoE Internet Camera
34
you to get more ambient light from the background, allowing you to see more detail from both the
subject and background of your video/picture.
Audio Setup
Use the Audio Setup menu to enable and disable the microphone and speaker as well as adjust
the volume of each.
Click Ok to save the changes you have made to the Video and Audio settings.
Click Cancel to discard any changes made.
Motion Detection
Motion detection is used to trigger video recording when motion is detected in a designated portion
of the video display. To designate a portion of the display used for motion detection, choose the
Draw motion area option and use the mouse and left mouse button to draw a rectangular area.
The drawn area appears as a red box on the display in the Motion Detection menu. Click the
Enable Video Motion box to check mark it and click the OK button. Sensitivity level can be set by
typing a value from 0 – 100, with 100 being the most sensitive.
Motion detection menu (drawn area in red)
To remove an established drawn motion area, select the Erase motion area option and click OK.
To remove an area that has not yet been saved, click Clear.