Filter
Top Products
TV-IP512P ProView PoE Internet Camera
39
Send to
Tick the E-mail Address checkbox to specify that the images will be sent to an e-mail address.
Configure the parameters as described below:
User Name- Type the User Name or login name for your e-mail account.
Password- Type the password for your e-mail account.
SMTP Mail Server- Type the SMTP server for your e-mail account.
Sender E-mail Address- Type the e-mail address that you want to appear as the “From:”
e-mail address in the snapshot e-mail.
Recipient E-mail Address- Enter the e-mail address that you want to send the
snapshots to.
Port- Enter the port number that will be used to send the snapshot e-mails.
Test- Click this button to send a test e-mail from the TV-IP512P to the specified recipient
e-mail address to verify that all the credentials have been configured correctly.
Tick the FTP Server checkbox to specify that the images will be sent to an FTP Server. Configure
the parameters as described below:
User Name- Type the User Name of your FTP account.
Password- Type the password for your FTP account.
Host Name- Type the Host Name of your FTP server.
Path- Enter the file path to the location on the FTP server you want to send snapshots to.
Filename Prefix- Enter the prefix you want to attach to your snapshot files.
Port- Enter the port number used by your FTP server.
Passive Mode- Tick this checkbox if your FTP server requires you to use passive mode.
Click the Ok button to save your changes, or click Cancel to discard any changes made.