Filter
Top Products
TV-IP512P ProView PoE Internet Camera
40
Digital images can also be sent to any display running the User Interface during the event. To
enable this use the Digital Output menu (see below).
Digital Output
Use this menu to enable digital output triggered by motion detection or an input signal through the
I/O terminal. The digital output signal is typically used to activate another device such as lights,
alarm or some type of notification. For example, a device connected to the I/O terminal might be
triggered when a door is opened.
Digital Output
With the digital output enabled from a D/I Signal trigger event, a light switch is turned on and a
recorded message is played.