Filter
Top Products
112 © 2007 VBrick Systems, Inc.
VBStar FTP File Transfer
Configuration: FTP File Transfer > Servers
Up to eight servers are available and can be simultaneously selected. When more than one
server is enabled, the appliance will transfer the newly recorded file to each of the enabled
severs, up to a maximum of eight. Since FTP transfer can be a slower than the recording
process, it is possible to overrun the FTP queue, especially if many servers are enabled. Also,
if operating in Batch record mode and the recorder attempts to open a new file that has not
been completely transferred, the recorder will stop. The failure condition is noted in the
Recorder Status menu.
File in Progress Name of the file currently being sent to the FTP destination
server(s).
• Last Complete FTP File – Name of the last completed file sent
via FTP.
• Operation Functions Buttons:
• Start Recorder – Starts recording selected file (s) to the Hard
Drive destination.
• Stop Recorder – Stops recording selected file (s).
• FTP Auto Send – FTP last recorded file via enabled servers.
• Refresh – Refreshes the content of this screen.
Last Completed File The name of the last completed file. In a batch file, this is the last
indexed file completed.