Filter
Top Products
44 © 2007 VBrick Systems, Inc.
Configuration: System > General
System
Network Time
Synchronization
Enabled or Disabled. If enabled, the System Date Time field
is inactive. See Network Time Synchronization
on page 11 to
set host name or IP address of time server. You must set these
parameters before you can enable Network Time Synchronization on
this window.
System Date Time Set system date and time in mm/dd/yyyy hh:mm format.
Current Operational
Mode
Indicates the current operational mode of the VBrick. The
following modes are supported. Note: Changing the Operational
Mode automatically reboots the VBrick.
Configured Operational
Mode
Indicates the configured operational mode of the VBrick. The
following modes are supported:
• Run Mode – Normal operation.
• Diagnostics – User selected mode for running certain VBrick
diagnostics.