Filter
Top Products
Niagara 2120 User Guide
ViewCast 33
Editing an Adobe Flash H.264 Encoder
When you create a new encoder, the Encoder Properties window appears. The Encoder Properties
windows for editing a new encoder or an existing encoder are identical. You must configure the
video and audio settings for each encoder type. Use the tabs Video, Audio, Output, and H.264
Settings to edit the settings. Begin with configuring the video and audio settings, then the streaming
properties. The streaming properties and advanced streaming settings are different for each type of
encoder.
From the Flash Encoder Properties window (Figure 21), you can set the encoder to start streaming
automatically by clicking the Auto Start checkbox. You can also start the encoder from this window
by clicking the Start Flash Encoder link in the top right corner of the window.
Click Encoders All Encoders from the home page. Then click the Edit link next to the encoder
whose properties you wish to modify. The system displays the Encoder Properties window for the
selected encoder.
IMPORTANT! If you make any changes to the Encoder Properties window, you must click
Submit. Otherwise, all your changes will be lost.
Figure 21. Flash Encoder Properties