Filter
Top Products
-
8
-
Note:
1. If the SD card is present in the camera, and then the picture/
video will save in the SD card. If no card is installed, the camera uses
internal memory.
2. If the “MEMORY FULL” warning message appears on the TFT, it
means the SD card or internal memory is full. Please remove the
memory and insert a new one or move/store all the pictures/videos in
memory to your computer.
• Turning On the Camera:
1. Press the Power button on as shown in
the illustration.
2. Buzzer will beep and indicator lamp will
light. The TFT will be turned on.
3. Press the Power button again to shut
down the camera.
• Setting the Date, Time and Date Stamp:
You should set the Date and Time when you first use your VQ5020 or the
battery is removed for an extended time (approximately 120 Seconds).
Use the following procedure to change the date and time setting.
1. Slide the Function switch to (Capture Status).
2. Press the MENU button to turn on function menu. Push the joystick up
or down to select [Advance] item, and then press the joystick to enter
the advanced menu.
3. Press the joystick up or down to select
[Date Time]
, and then press the
joystick to enter the submenu.