Filter
Top Products
-
12
-
Red-eye—
flash fires once so the subject’s eyes become
accustomed to the flash, then fires again when the picture is taken.
The Red-eye option remains in effect until you change it.
Note: 1. All flash options revert to Off when the camera is turned off.
2. Flash is off during continuous mode and video mode.
3. This setting remains until you change it.
• Setting Picture Quality
Use the Quality setting to select a picture resolution:
1. Make sure the Function switch is set to
, and then press the MENU
button.
2. Push the joystick up or down to select [
Size]
and then press the joystick.
3. Select an option with or :
L 12Mpix
— for enlarged picture size; produces higher picture resolution
and larger file size.
M 5Mpix — for standard picture size; produces normal picture resolution
and middle file size.
S 3Mpix
— for small picture size; pictures are of lower resolution and file
size is smaller.
4. Press the joystick to confirm.
Note: 1. This setting remains until you change it.
2. Movies can be shot with the QVGA (320 x 240) or VGA (640 x 480)
resolution.