Filter
Top Products
-
13
-
• Adjusting the Exposure
Set the exposure value (EV value) manually to compensate for certain lighting
conditions including: backlighting, indirect lighting, and dark backgrounds.
1. Make sure the Function switch is set to
, then press the MENU button.
2. Push the joystick up or down to select
[
EV]
and press the joystick button.
3. Push the joystick up or down to change the exposure value:-2.0 EV ~+2.0
EV.
4. Press the joystick button to confirm.
• Taking the picture in Self-timer mode
The Self Timer creates a default delay between the time you press the Shutter
button and the time the picture is taken. This setting is ideal when you want to
include yourself in the picture.
1. Make sure the Function switch is set to .
2. Push the joystick down until appears on the TFT. (Self-Timer Mode)
3. Place the camera on a flat surface or use a tripod.
4. Compose the picture, then press the Shutter button all the way down.
5. The red Self Timer light, located on the front of the camera, blinks for 10
seconds before the picture is taken.