Filter
Top Products
-
9
-
4. Press the joystick up or down to adjust the date and time. Press the
joystick left or right to adjust to the next setting.
5. When finished, press the MENU button to exit the menu.
Use the Date Stamp setting to imprint the date on your pictures.
1. In the Date Time Setting menu. Make sure
the camera clock is set to the correct date.
2. Push the joystick left or right to select [Date
stamp] option.
3. Press the joystick to switch the Date stamp
function to on (tick on) or off (tick off).
4. Press the
MENU
button to exit the menu.
• Power Saving:
The camera will automatically power off approximately 3 minutes after you
do not perform any operation.
When this function is disabled, the power is not turned off automatically.