Filter
Top Products
VIVOTEK
User's Manual - 51
Network: This rule allows the user to assign a network address and corresponding subnet mask to
the Allow/Deny List� The address and network mask are written in CIDR format�
For example:
Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List.
Note: This rule is only applied to IPv4.
For example:
Administrator IP address
Always allow the IP address to access this device: You can check this item and add the
Administrator’s IP address in this eld to make sure the Administrator can always connect to the
device�
IP addresses 192�168�2�x will be bolcked�
There are three types of rules:
Single: This rule allows the user to add an IP address to the Allowed/Denied list.
For example:
192.168.2.1