Filter
Top Products
13
Getting started
Installing and charging the battery pack
Installing and charging the battery pack
Before you use your Rovio, you need to install and charge the battery pack.
To install the batteries:
1. Locate and open the battery compartment door on the underside of Rovio.
2. Using a Phillips screwdriver (not included) loosen the two screws on the
battery compartment door and remove it.
3. Locate and note the orientation of the battery connector and connect it to the
battery. Insert and connect the battery according to the diagram in step 2.
4. Replace the battery compartment door and tighten the screws using the
screwdriver. Do not over-tighten.