Next Available Options:
■ integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal. (p. 239)
■ binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY) (p. 227)
■ well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
Codepoint) value and an 802(p. 285)
■ interface vlan VLAN-ID qos dscp
Specify DSCP policy to use.
Next Available Options:
■ integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal. (p. 239)
■ binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY) (p. 227)
■ well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
Codepoint) value and an 802(p. 285)
■ interface svlan VLAN-ID qos dscp
Specify DSCP policy to use.
Next Available Options:
■ integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal. (p. 239)
■ binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY) (p. 227)
■ well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
Codepoint) value and an 802(p. 285)
enable
■ interface [ETHERNET] PORT-LIST enable
Usage: enable
Description: Enable port(s).
This is an Interface context command. It can be called directly
from the interface context or follow the 'interface [ethernet]
PORT-LIST' command.
■ [no] interface vlan VLAN-ID ipv6 enable
Enable IPv6 on an interface and congures an automatically generated link-local addr.
■ [no] interface vlan VLAN-ID vrrp vrid < 1 to 255 > enable
Usage: [no] vrrp vrid <VRID> enable
Description: Enable/disable operation of the virtual router instance.
The default value is 'disabled'.
■ [no] interface svlan VLAN-ID ipv6 enable
Enable IPv6 on an interface and congures an automatically generated link-local addr.
eui-64
■ [no] interface vlan VLAN-ID ipv6 address IPV6-ADDR/PREFIX-LEN eui-64
232© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide
