A SERVICE OF

logo

VX-8R OPERATING MANUAL 99
SETTING THE CHANNEL COUNTER SWEEP WIDTH
You may change the bandwidth of the Channel Counter. Available selections are ±5, ±10,
±50, and ±100 MHz (default: ±5 MHz).
Here is the procedure for setting the Channel Counter Bandwidth:
1. Press and hold the key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item
19: CH19: CH
19: CH19: CH
19: CH
COUNTERCOUNTER
COUNTERCOUNTER
COUNTER.
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired bandwidth (see
above).
5. Press the PTT switch briefly to save the new setting and
exit to normal operation.
CHANNEL COUNTER OPERATION