VX-8R OPERATING MANUAL 143
SET MODE ITEM 6: ARTS INTERVAL
Function: Select the Polling Interval during ARTS operation.
Available Values: 15sec / 25sec
Default: 25sec
This setting determines how often the other station will be polled during ARTS operation.
SET MODE ITEM 7: BANK LINK
Function: Enables/Disables the Memory Bank Link Scan. See page 67 for details.
SET MODE ITEM 8: BANK NAME
Function: Stores Alpha-Numeric “Tag” for the Memory Bank. See page 50 for details.
SET MODE ITEM 9: BCLO
Function: Enables/Disables the Busy Channel Lock-Out feature.
Available Values: ON / OFF
Default: OFF
SET MODE ITEM 10: BEEP EDGE
Function: Enables/Disables the Band-edge beeper while selecting the frequency by the
DIAL knob.
Available Values: ON / OFF
Default: OFF
Note: When this Set Mode Item is set to “ON”, a beep will sound when the frequency
reaches the band edge while selecting the VFO frequency with the DIAL knob.
SET MODE ITEM 11: BEEP LEVEL
Function: Adjust the Beep volume level.
Available Values: LEVEL 1 ~ LEVEL 9
Default: LEVEL 5
SET MODE ITEM 12: BEEP MELODY
Function: Create the Beep Melody for Bell ringer function. See page 43 for details.
SET MODE ITEM 13: BEEP SELECT
Function: Enables/Disables the keypad beeper.
Available Values: KEY & SCAN / KEY / OFF
Default: KEY & SCAN
KEY & SCAN: The beeper sounds when you press a key or when the scanner stops.
KEY: The beeper sounds when you press a key.
OFF: The beeper is disabled.
SET MODE
SET MODE SELECTION DETAILS
