VX-8R OPERATING MANUAL 145
SET MODE
SAVE: OFF: Disable the Battery Save function of the BH-1/BH-2 Bluetooth
®
Headset.
POWR: ON: Enable the BU-1 Bluetooth
®
Unit.
POWR: OFF: Disable the BU-1 Bluetooth
®
Unit.
SET MODE ITEM 18: BUSY LED
Function: Enables/Disables the BUSY LED while the squelch is open.
Available Values: ON / OFF
Default: ON
SET MODE ITEM 19: CH COUNTER
Function: Selects the Channel Counter Search Width.
Available Values: ±5MHz / ±10MHz / ±50MHz / ±100MHz
Default: ±5MHz
SET MODE ITEM 20: CLOCK SHIFT
Function: Shifting of CPU clock frequency.
Available Values: ON / OFF
Default: OFF
Note: This function is only used to move a spurious response “birdie”, should it fall on a
desired frequency.
SET MODE ITEM 21: CW ID
Function: Program and activate the CW Identifier (used during ARTS™ operation). See
page 95 for details.
SET MODE ITEM 22: CW LEARNING
Function: Enables/Disables the CW Learning feature. See page 116 for details.
SET MODE ITEM 23: CW PITCH
Function: Select the CW tone pitch for the CW Learning, CW Training, and CW Identi-
fier functions.
Available Values: 400 ~ 1000 Hz (50 Hz/step)
Default: 700Hz
SET MODE ITEM 24: CW TRAINING
Function: Enables/Disables the CW Training feature. See page 118 for details.
SET MODE ITEM 25: DC VOLTAGE
Function: Indicates the DC Supply Voltage.
SET MODE SELECTION DETAILS
