VX-8R OPERATING MANUAL160
SET MODE ITEM 106: VFO SKIP
Function: Set the My Band.
Available Values: ON/OFF
Default: OFF
The “My Band” feature allows you to select several operating bands, and make only those
bands available for selection via the key.
ON: Only the bands that are turned on will be shown when pushing the key.
OFF: When the key is pressed, the bands that are turned “OFF” will not be shown.
See page 100 for details.
SET MODE ITEM 107: VOLUME MODE
Function: Select the key function.
Available Values: NORMAL / AUTO BACK
Default: NORMAL
NORMAL: The key keeps the status while pressing the key.
AUTO BACK: The key keeps the status for approximately three seconds after press-
ing the key.
SET MODE ITEM 108: VOX
Function: Enables/Disables VOX operation; sets VOX sensitivity.
Available Values: OFF / HIGH / LOW
Default: OFF
SET MODE ITEM 109: VOX DELAY
Function: Selects the VOX delay (“hang”) time.
Available Values: 0.5sec / 1.0sec / 1.5sec / 2.0sec / 2.5sec / 3.0sec
Default: 0.5sec
SET MODE ITEM 110: WAVE MONITOR
Function: Selects the Wave-Form function while displaying the Wave-Form via Set Mode
Item 85: SENSOR DISPLAY.
Available Values: ALL / RX SIGNAL / TX MODULATION
Default: OFF
ALL: Displays the RX Audio wave form and TX Audio modulation wave
form.
RX SIGNAL: Displays the RX Audio wave form.
TX MODULATION: Displays the TX Audio modulation wave form.
SET MODE ITEM 111: WX ALERT
Function: Enables/disables the Weather Alert Feature
Available Values: ON/OFF
Default: OFF
SET MODE
SET MODE SELECTION DETAILS
