VX-8R OPERATING MANUAL 151
SET MODE
SET MODE ITEM 53: MEMORY NAME
Function: Stores “Alpha-Numeric” tags for the Memory channels.
See page 50 for details.
SET MODE ITEM 54: MEMORY PROTECT
Function: Enables/Disables the Memory Write Protector.
Available Values: ON/OFF
Default: OFF
Note: When this Set Mode Item is set to “ON”, the memory write operation is ignored.
SET MODE ITEM 55: MEMORY SKIP
Function: Selects the Memory Scan channel-selection mode.
Available Values: OFF / SKIP / ONLY
Default: OFF
OFF: All memory channels will be scanned (the “flag” will be ignored).
SKIP: The scanner will “skip” the flagged channels during scanning.
ONLY: The scanner will only scan channels that are flagged (Preferential Scan List).
SET MODE ITEM 56: MEMORY WRITE
Function: Determines the method of selecting channels for Memory Storage.
Available Values: NEXT / LOWER
Default: NEXT
NEXT: Stores the data into the memory channel, which is next highest from the last-
stored memory channel.
LOWER:Stores the data into the next-available “free” channel.
SET MODE ITEM 57: MESSAGE LIST
Function: Programming a Member List for the Message feature.
See page 103 for details.
SET MODE ITEM 58: MESSAGE REGISTER
Function: Selects your Personal ID for the Message feature.
See page 104 for details.
SET MODE ITEM 59: MESSAGE SELECT
Function: Programming a Message for the Message feature.
See page 102 for details.
SET MODE ITEM 60: MIC GAIN
Function: Adjusts the microphone gain level.
Available Values: LEVEL 1 ~ LEVEL 9
Default: LEVEL 5
SET MODE SELECTION DETAILS
