A SERVICE OF

logo

VX-8R OPERATING MANUAL 61
SCANNING
To set the Scan-Restart Delay Time:
1. Press and hold the key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item
82: SCAN82: SCAN
82: SCAN82: SCAN
82: SCAN
RE-STARTRE-START
RE-STARTRE-START
RE-START.
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired Scan-Restart
Delay Time. Available selections are
0.1sec0.1sec
0.1sec0.1sec
0.1sec -
0.9sec0.9sec
0.9sec0.9sec
0.9sec
(0.1sec/step) and
1.0sec1.0sec
1.0sec1.0sec
1.0sec -
10.0sec10.0sec
10.0sec10.0sec
10.0sec (0.5sec/step).
5. Press the PTT switch to save the new setting and exit to
normal operation.
The default condition for this Set Mode Item is “2.0sec”.
GENERAL