Filter
Top Products
13
INSTALLATION
WDM Driver Installation - The supplied CD provides the WDM drivers needed to communicate
between the Acclaim Camera System and the associated user-supplied USB streaming video software
application installed on the PC computer system. Install the WDM drivers for the corresponding operat-
ing system (Windows 2000 or Windows XP) by performing the following procedures.
Installing Driver Files Under Windows 2000:
1. Insert the supplied CD into the CD-ROM drive on the PC. Windows may display a screen
providing options to install Acrobat Reader or to view the Acclaim Camera System
Operator's Manual. If so, click
EXIT to close this screen.
2. Make sure that the supplied USB 2.0 high speed cable is connected per procedures above.
Windows should display the
Found New Hardware Wizard Screen.
3. On the first wizard screen, click
NEXT to continue.
4. On the second wizard screen, select the
SEARCH FOR A SUITABLE DRIVER FOR MY
DEVICE
option and then click NEXT to continue.
5. Select the
CD-ROM DRIVES option and then click NEXT to continue.
6. Windows should now display a screen indicating that the wizard has found a driver for the
Acclaim Camera System in the DEVICE DRIVERS folder on the CD.
If so, click
NEXT to continue.
If not, click
BACK to return to the previous screen, select the SPECIFY A LOCATION option
in place of the
CD-ROM DRIVES option, click NEXT and then use the BROWSE button to
manually locate the “Acclaim USB Camera.INF” file in the DEVICE DRIVERS folder on the
CD. Click
NEXT to continue.
7. On the this wizard screen, Windows may indicate that a digital signature was not found.
Click
YES to continue.
8. On the final wizard screen, click
FINISH to complete the driver installation.
Installing Driver Files Under Windows XP:
1. Insert the supplied CD into the CD-ROM drive on the PC. Windows may display a screen
providing options to install Acrobat Reader or to view the Acclaim Camera System
Operator's Manual. If so, click
EXIT to close this screen.
2. Make sure that the supplied USB 2.0 high speed cable is connected per procedures above.
Windows should display the
Found New Hardware Wizard Screen.
3. Select the
II
NSTALL THE SOFTWARE AUTOMATICALLY option and then click NEXT to
continue.
4. Windows may now display a screen indicating that the software for the Acclaim USB
Camera has not passed Windows logo testing. Click
CONTINUE ANYWAY to continue.
5. On the next wizard screen, click
FINISH to complete the driver installation.