Filter
Top Products
9
CONTROL MODULE CONTROLS AND CONNECTORS
POWER INDICATOR LAMP
CAMERA Connector A 10 pin connector socket that accepts connection of the keyed 10-pin
quick disconnect plug end from the multi-conductor Handpiece cable.
Makes connection between the Camera Handpiece and Control
Module to provide power, video output and control for the camera.
Power Indicator Lamp A green LED lamp that illuminates to indicate the presence of 12 VDC
operating power from the power supply adapter.
STANDBY/ON Switch A rocker panel switch that controls the application of 12 VDC operating
power from the Power Supply Adapter.
When set in the ON position, the 12 VDC is applied, the LED power
indicator lamp illuminates, and the camera is operational.
The 12 VDC is removed and the camera is turned off when the switch
is set in the STANDBY position and the LED power indicator lamp
extinguishes.
Control Module
A5050
Front Panel
Control Module
A5050
Rear Panel
12 VDC Connector Provides connection of the 12 VDC operating power from the Power
Supply Adapter.
S-VIDEO Connector A 4-pin Mini DIN connector that provides output connection for
S -Video peripherals (e.g. video monitor or computer with capture
card).
VIDEO Connector An RCA connector that provides connection for composite video
peripherals (e.g. video monitor or computer with capture card).
PC Connector An 8-pin mini DIN connector that provides connection to the PC Game
Port of the computer.
USB Connector A USB type B connector that provides connection to the USB 2.0 High
Speed port of the computer.