Filter
Top Products
88
HANDPIECE KEYPAD BUTTON FUNCTIONS
Acclaim Camera
Handpiece
A5020
3
2
1
Keypad Buttons - Each keypad button provides the Acclaim Camera Handpiece fingertip control
over the PC streaming video capture software via the gameport cable. The specific functions performed
by the keypad buttons depend on system hardware and software installation configurations that support
a 2-button footswitch. Typical keypad actions provided below.
NNOOTTEE::
Simultaneously depressing both keypad buttons for approximately 3
seconds deactivates the Camera Handpiece LED light source. This is
commonly used when imaging an X-ray on a light box.
(1) Top Keypad Button Sends a gameport footswitch button 1 command to the PC via the
gameport control cable. While the specific function performed
depends on the setting of the video capture software application
installed on the PC, this command typically freezes and unfreezes the
image that is displayed on the computer monitor.
(2) Bottom Keypad Button Sends a gameport footswitch Button 2 command to the PC via the
gameport control cable. While the specific action depends on the
video capture software installed, it typically saves the image displayed
on the computer monitor to the computer hard disk.
(3) Handpiece Connector An 8-pin connector socket that accepts connection of the keyed 8-pin
quick-disconnect plug end from the multi-conductor Handpiece cable.
Makes connection between the Camera Handpiece and Control Module
to provide power, video and control for the Acclaim Camera.