Filter
Top Products
16
CAMERA HANDPIECE PORTABILITY
The Acclaim Camera Handpiece quickly detaches from the Handpiece Cable and is easily carried
among patient operatories for use with additional Acclaim Camera System Control Modules. Refer to
the corresponding illustrations and transport the Camera Handpiece as follows:
1. Retract collar of quick disconnect Handpiece Cable connector and simultaneously pull
straight from the Handpiece connector.
2. Release connector quick disconnect collar.
3. Store the Handpiece Cable by placing cable slide holder into the Handpiece Holder.
4. Transport Handpiece to next operatory.
5. Connect Handpiece at new location by aligning the connector key with the keyway
of the mating Handpiece Cable connector.
6. Insert straight into Handpiece connector until it securely snaps into place.
DO NOT TWIST OR TURN THE HANDPIECE CABLE CONNECTOR. THE CONNECTOR
IS KEYED AND MATES STRAIGHT ON WITH
CAMERA HANDPIECE CONNECTOR.
Detaching Camera Handpiece
Quick Disconnect Collar
Camera Handpiece
Quick Disconnect
Connector End
Handpiece
Cable
Handpiece Holder
Cable Slide Holder
Stored Handpiece Cable
Camera Handpiece Connection
Connector Key
Camera Handpiece
INSTALLATION
2. Connection without gameport made via optional
external A5125 gameport to USB adapter cable -
a. Connect USB connector end of the A5125
adapter to the USB port on the rear of the PC.
b. Set the red DIP switch on DB-15 connector of the
A5125 USB adapter to the Joystick A
(option 2) position.
c. Turn on Computer and observe that the A5125
USB adapter is recognized.
d. Connect 8-Pin Mini DIN connector end of the PC
Game Port Control cable to the PC connector on
the rear of the Control Module.
e. Connect the DB-15 connector end of the PC
Game Port Control cable to the A5125
gameport to USB adapter DB-15 connector.
Tighten connector securing screws.
REAR OF PC
Connection without Gameport
Supplied PC Game
Port Control Cable
USB
Port
Optional
USB
Adapter
Cable
8-Pin Mini DIN
Connector