Filter
Top Products
If the key length is 64-bit, you should input 10 HEX characters
or 5 ASCII characters, like 112233aabb (HEX) or MYWEP
(ASCII).
If the key length is 128-bit, you should input 26 HEX characters
or 13 ASCII characters, like 11223344556677889900abcdef
(HEX) or myweppassword (ASCII).
WEP Key Format
Select the Key Format of WEP key here. Available options are
‘HEX’ and ‘ASCII’.
When you select ‘HEX’ WEP key format, you can only use
numbers (0 to 9), and alphabet a to f as WEP key; when you
select ‘ASCII’ WEP key format, you can use all alphanumerical
characters, and is case sensitive.
Default Key Select the default key set that the IP camera should use
against the wireless access point when WEP encryption is
used.
Available options are 1 to 4.
WEP Key 1 Input the 1
st
set of WEP key here. At least a set of WEP key is
required if you use WEP as Authentication.
You should enter the key value into WEP Key 1 if you only have
one key.
WEP Key 2 Input the 2
nd
set of WEP key here.
WEP Key 3 Input the 3
rd
set of WEP key here.
WEP Key 4 Input the 4
th
set of WEP key here.
Click ‘Apply’ to save settings and make the new settings take effect.