Filter
Top Products
The descriptions of every setting in this menu will be given below:
Item Description
FTP Server Input the IP address or host name of the FTP server you wish
to use here.
FTP Port Input the port number of the FTP server you wish to use here.
User Name Input the user name of the FTP server you wish to use here.
Password Input the password of the FTP server you wish to use here.
Remote Folder Input the remote folder name on the FTP server here. If nothing
is specified here, all uploaded image files will be placed in FTP
server’s root directory.
Please ask FTP server’s administrator to know which folder you
should use. Certain user name may have restrictions and
therefore can not place the file in the directory not owned by the
user.
Passive Mode Select ‘Enable’ to use passive mode to send file, or select
‘Disable’ to not to use passive mode to send file.
Some FTP servers require passive mode, if you don’t know,
please ask FTP server’s administrator; most of FTP servers will
work fine with both modes, but if you found that non-passive
mode is not working, you can try to use passive mode.
Click ‘Apply’ to save settings and make the new settings take effect.
After that, you can click ‘Upload a test file’ to send a file to the FTP server you set
here, so you can make sure the setting you specified here is correct and working.