Filter
Top Products
NTP Server Please input the IP address or host name of NTP server here.
You can use default value ‘pool.ntp.org’, or ask your ISP for the
IP address or host name, if they have one.
Enable Daylight
Saving Time
Select ‘Yes’ if your area of residence uses daylight saving; if
not, select ‘No’.
Synchronize to
PC time
Click this button and the IP camera will use the current time
setting of your computer as IP camera’s time setting.
Click ‘Apply’ to save settings and make the new settings take effect.
2.8.3 Utilities
This menu allows you to upgrade firmware, clear all settings, reboot the IP camera,
and switch LED lights on/off.
The descriptions of every setting in this menu will be given below:
Item Description
Upgrade
Firmware
If you downloaded latest firmware file from our website, you
can click ‘Browse’ button to pick the firmware file you wish to
use. Then click ‘Upgrade’ button to start firmware upgrade
procedure.
It’s recommended to use wired Ethernet connection when you
use this function, and DO NOT DISCONNECT OR CLOSE
WEB BROWSER DURING UPGRADE!
Reset to Factory
Defaults
Clear all settings in the camera. Please think again before you
do this, and then click this button to reset all settings.
NOTE: IP address will be reset to default value ‘192.168.2.240’