Filter
Top Products
2.6 Motion Detection
2.6.1 Basic Settings
Motion detection function makes this IP camera become your non-stop guard. You
don’t have to waste time monitoring the images from the camera, yet it will detect all
motions for you. Once motion is detected, a captured image will be sent to you by
Email or via FTP.
You can access this menu by clicking ‘Motion Detection’ on the top of web
management interface.
The descriptions of every setting in this menu will be given below:
Item Description
Motion Detection
Enable
Select ‘Enable’ to start motion detection, and select ‘Disable’ to
disabled it.
Next Event
Detected Interval
Specify the time interval between two motion detections in
seconds. If a motion is detected after last detection time, and
before next detection time, nothing will be send by Email or via
FTP.
Please specify a time interval that suites your need. If the time
interval is too long, you may not be able to know what is
happened between time interval; if the time interval is too short,
you may receive too many unnecessary images or it may
consume too much storage spaces on Email and / or FTP