Filter
Top Products
SMTP Server Input the IP address or host name of the SMTP server (the
server that delivers the Email for you) here.
If you don’t know, please refer to the SMTP server you’re using
in your Email software (i.e. Microsoft Outlook), or ask your
network administrator or ISP.
SMTP Port Input mail server’s SMTP port here. Most of mail servers use
port number 25.
Sender E-Mail
Address
Input the Email address of mail sender, this will help you to
identify the Email sent by this IP camera by sender’s Email
address.
NOTE: Some mail server would reject to deliver the Email from
unknown sender, it’s recommended to input your own Email
address here, or any other actual one.
SMTP
Authentication
Some SMTP server requires mail senders to be authenticated
before they can send Email. If your SMTP server requires you
to do so, please select ‘Enable’, or select ‘Disable’ to disable it.
If you don’t know, please refer to the SMTP server you’re using
in your Email software (i.e. Microsoft Outlook), or ask your
network administrator or ISP.
User Name Please input the user name of SMTP server here, if your SMTP
server requires the use of authentication.
Password Please input the password of SMTP server here, if your SMTP
server requires the use of authentication.
Click ‘Apply’ to save settings and make the new settings take effect.
After that, you can click ‘Send a test email’ to send a testing Email to the address you
set here, so you can make sure the setting you specified here is correct and working.
2.5.2 FTP Settings
These settings are used to send the captured picture by FTP: