Filter
Top Products
IP Wireless Security Motorized Camera
A02-IPCAM2-W54_ME01 16
8.2.3 Basic Setup
The Basic menu contains three steps that will guide you through the basic configuration for the camera.
Click Basic in the top menu bar to start the step-by-step configuration.
Basic J Network
The first step is to configure networking settings of the camera. According to your ISP’s service, select
one from the three connection types: LAN, PPPoE, and DDNS.
LAN
If your network access uses a fixed IP address or DHCP service, select this option
and fill in the required data provided by your network administrator in the fields of IP
Address, IP Subnet Mask, Gateway IP Address, and DNS (Domain Name
Server).
PPPoE
If your network access uses PPPoE (Point-to-Point Protocol over Ethernet), select
this option. Fill in the required data in the User Name and Password fields, which
are supplied by your ISP. The IP Address is usually allocated automatically.
DDNS
The camera supports Dynamic DNS (DDNS) feature, which allows you to assign a
fixed host and domain name to a dynamic Internet IP address. Select Yes to
enable this function, and then fill in the required data in the User Name, Password
and Domain Name fields. Please note that you have to sign up for DDNS service
with service providers before using this function.