Filter
Top Products
IP Wireless Security Motorized Camera
A02-IPCAM2-W54_ME01 67
Appendix B
Trouble Shooting
Question Answer
I cannot access the IP
Wireless Security
Motorized Camera from
a web browser.
The possible cause might be the IP Address for the IP
Wireless Security Motorized Camera is already being used by
another device. To correct the possible problem, you need to
first disconnect the IP Wireless Security Motorized Camera
from the network. Then run the PING utility.
The PING (Packet Internet Groper) command can determine
whether a specific IP address is accessible by sending a
packet to the specific address and waiting for a reply. It can
also provide a very useful tool to confirm if the IP address
conflicts with the camera over the network.
Follow the step-by-step procedure below to utilize the PING
command. However, you must disconnect the camera from
the network first.
Start a DOS window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the
camera.
The succeeding replies as illustrated below will provide useful
explanation to the cause of the problem with the camera IP
address.