Filter
Top Products
IP Wireless Security Motorized Camera
A02-IPCAM2-W54_ME01 20
• Bit Rate: You can setup bit rate of the image by selecting Kbps or Mbps. The setting range is
4Kbps~3Mbps. The higher setting can obtain better quality; however, it will use more resource
within your network.
• Camera Name: You can change the name of the camera.
- Light Frequency: Adjust the light frequency to suit your area of operation from the options
either 50 Hz or 60 Hz (default).
Location Setting
Click the Location Setting item of the Video submenu to bring up the following page, which allows you
to setup the video control settings of the camera.
- Upside Down: Display the image in a vertical mirror mode.
- Mirrored: Display the image in a horizontal mirror mode.
- Location: When you have saved the position in the camera, select the location from the pull-
down list, and then click Apply. The camera’s lens will move to the location immediately.
Motion Detection
Click the Motion Detection item of the Video submenu to bring up the following page, which allows you
to setup the motion detection settings of the camera.