Filter
Top Products
IP Wireless Security Motorized Camera
A02-IPCAM2-W54_ME01 19
8.2.4 Advanced Setup
The camera will function fine after the Basic configuration, however, you may wish to explore more
advanced options. This section explains each parameter and setting procedures for advanced
configuration of the camera. Move your mouse onto the Advanced button, and it will automatically pop
up a submenu bar as below.
The submenu bar provides six submenu buttons: Video, Network, Wireless (for wireless model), Tools,
Account, and Timezone. Each submenu button allows you to access advanced feature settings, and is
explained details in the following sections.
Advanced J Video
The Video submenu contains three options: Image Setting, Location Setting and Motion Detection.
Image Setting
Click the Image Setting item of the Video submenu to bring up the following page, which allows you to
setup the image settings of the camera.
- Default Level: Select this option to use the default image settings of the camera.
• Quality: You can setup the image quality from this pull-down list. The default setting is High.
• Capture Resolution: You can setup the image resolution when you capture a still image. The
default setting is VGA(640*480).
- Custom Level: Select this option when you want to customize the image configuration.
• Capture Resolution: You can setup the image resolution when you capture a still image. The
default setting is VGA(640*480).
• Frame Rate (fps): Select the optimal setting depending on your network status. The higher
setting can obtain better quality; however, it will use more resource within your network.