Filter
Top Products
IP Wireless Security Motorized Camera
A02-IPCAM2-W54_ME01 24
Advanced J Wireless
If you use a wireless camera, you can configure the respective settings in the Wireless submenu, which
contains two options: Setting and Site Survey.
Setting
Click the Setting item of the Wireless submenu to bring up the following page.
- Wireless: The default setting is Disable. Select Enable/Disable to start/stop the wireless
function of the camera.
- Connection Mode: Use this option to determine the type of wireless communication for the
camera. There are two choices: Infrastructure mode and Ad-Hoc mode.
- SSID: SSID (Service Set Identity) is the name assigned to the wireless network. It will auto-
detect and display the SSID of wireless network connected in this box. This default setting will
let the camera connect to ANY access point under the infrastructure network mode.
- Channel: This pull-down menu provides the wireless channel for communication. A “channel” is
a range of frequencies to be used in communication between the camera and access point in
Infrastructure mode, or the camera and PC/Notebook in Ad-Hoc mode. Select the appropriate
channel from the list provided depending on the regulatory region where the unit is sold.
- Security Mode: Wireless network communications can be intercepted easily. This option will
help you protect your wireless network.
- Authentication: Open communicates the key across the network. Shared allows
communication only with other devices with identical WEP settings.
- Encryption Mode: This option allows you to configure the setting of data encryption. The WEP
key must be set before the data encryption is enforced.
- Key Format: To enable WEP Encryption, you should decide the encryption format first by
selecting the ASCII or HEX option, and then input the WEP key (in the following Key 1~4 box).